Trivector Manufacturing
SHEET METAL
FABRICATION
Our Sheet Metal Fabrication department has more than 15 pieces of machinery to accomplish any job. At the forefront, our lineup of Salvagnini Machines allows us to remain flexible, efficient, and precise through the use of automation and software.
See our equipment lineup and capabilities by expanding each section below.
Laser Cutting
Salvagnini L5 Laser Cutter
Material Specifications
| Model | L5-30 |
| XY working range (mm) | 3048 x 1524 |
| Z axis stroke (mm) | 100 |
| Maximum XY speed (m/min) | 156 |
| Precision1 | |
| Position accuracy Pa | 0.08 |
| Average position range Ps | 0.03 |
| Fiber source | 6000W |
| Cutting capacity (maximum thickness in mm)2 | |
| Steel | 25 |
| Stainless steel | 20 |
| Aluminum | 20 |
| Copper | 8 |
| Brass | 8 |
| Minimum thickness (mm) | 0.5 |
| Consumption (in kW) | |
| Maximum absorbed power (in kW)3 | 28 |
| Average absorbed power (in kW)4 | 16 |
1 Measurement calculated according to VDI3441 on maximum axis lengths.
2 Cutting quality on limit thicknesses may depend on geometries required, material quality and system operating conditions. At limit values, burrs may be present on the lower edge of the cut. These values are for the Salvagnini reference materials.
3 Maximum absorbed power calculated on the standard system configuration (machine, source, chiller, fume extractor), in 3 cutting cycles on mild steel from 0.8 to 6 mm.
4 Average absorbed power calculated on the standard system configuration (machine, source, chiller, fume extractor), in 3 cutting cycles on mild steel from 0.8 to 6 mm.
5 High efficiency version.
Automated Bending
Salvagnini S4+P4
Salvagnini P4 Lean
Salvagnini B3
Maximum Material Specifications
| Model | P4-2520 |
| Maximum length of incoming sheet (mm) | 3050 |
| Maximum width of incoming sheet (mm) | 1524 |
| Maximum diagonal that can be rotated (mm) | 3200 |
| Maximum bending force (kN) | 660 |
| Maximum clamping force (kN) | 1060 |
| Maximum bending length (mm) | 2500 |
| Maximum bending height (mm) | 203 |
| Minimum thickness (mm) | 0.5 |
| Maximum thickness and bending angle steel, UTS 410 N/mm2 (mm) | 3.2 (±90°) 2.5 (±130°) 2.1 (±135°) |
| Maximum thickness and bending angle stainless steel, UTS 660 N/mm2 (mm) | 2.5 (±90°) 2.1 (±125°) 1.6 (±135°) |
| Maximum thickness and bending angle aluminium, UTS 265 N/mm2 (mm) | 4.0 (±120°) 3.5 (±130°) 3.0 (±135°) |
| Model | B3 135/3000 |
| Maximum bending force (Tons) | 135 |
| Table length (mm) | 3060 |
| Distance between side frames (mm) | 2640 |
| Throat depth (mm) | 435 |
| Maximum approach and return speed (mm/s) | 250 |
| Bending speed* (mm/s) | 15 |
| Maximum stroke (mm) | 350 |
| Table-ram distance (mm) | 600 |
| Total lenght (mm) | 4310 |
| Total width (mm) | 1735 |
| Total height (mm) | 3295 |
| Average consumption (kWh) | 1.5 |
| Mass (kg) | 11700 |
Shearing
Salvagnini S4
ADDITIONAL SHEARING MACHINES ON-SITE
Salvagnini S4xe.30 Material Capabilities
| Model |
S4Xe.30 (Shearing) |
| Maximum sheet dimensions (mm) |
3048 x 1650 |
| Maximum sheet diagonal (mm) |
3466 |
| Minimum sheet dimensions (mm) |
370 x 300 |
| Maximum speed (m/min): | |
| X axis |
132 |
| Y axis |
96 |
| Speed with both axes moving simultaneously (m/min) |
163 |
| Maximum acceleration (m/s2): | |
| X axis |
30 |
| Y axis |
15 |
| Maximum material thickness (mm) | |
| Aluminum, UTS 265 N/mm2 |
5.0 |
| Steel, UTS 410 N/mm2 |
3.5 |
| Stainless steel, UTS 610 N/mm2 |
2.0 |
| Minimum material thickness (mm) |
0.5 |
Punching
Salvagnini S4
Material Specifications
| Model | S4Xe.30 (Punching) |
| Maximum sheet dimensions (mm) | 3048 x 1650 |
| Maximum sheet diagonal (mm) | 3466 |
| Minimum sheet dimensions (mm) | 370 x 300 |
| Maximum speed (m/min): | |
| X axis | 132 |
| Y axis | 96 |
| Speed with both axes moving simultaneously (m/min) | 163 |
| Maximum acceleration (m/s2): | |
| X axis | 30 |
| Y axis | 15 |
| Maximum material thickness (mm) | |
| Aluminum, UTS 265 N/mm2 | 5.0 |
| Steel, UTS 410 N/mm2 | 3.5 |
| Stainless steel, UTS 610 N/mm2 | 2.0 |
| Minimum material thickness (mm) | 0.5 |
MACHINERY
Salvagnini
S4+P4
Salvagnini
P4 Lean
Salvagnini
L5
Salvagnini
B3
Wysong
MTH60-120
Hydrapower
WC67K
Cincinnati
2510
Atlas COPCO
Henrob
Our Salvagnini Machinery
100% Flexible Automation
Salvagnini S4+P4
The S4+P4 line punches, shears and bends sheet metal totally automatically, without any intermediate handling. Among other benefits, the line allows to produce on demand and just in time, to increase capacity and velocity, to reduce lead time, to process different materials without retooling, to optimize manpower activities.
Automatic Panel Bender
Salvagnini P4 Lean
The P4 uses universal bending tools which automatically adapt in-cycle to the panel geometry, without machine down times or manual retooling, allowing batch-one or kit productions.
Panel Adaptive Fiber Laser
Salvagnini L5
A cutting-edge, high-precision laser cutting machine designed for unmatched versatility, productivity, and cost-efficiency. Features a single laser head capable of cutting through a wide range of materials and thicknesses. Perfect for designs requiring curves and high dynamic movements.
Scalable-Automation Press Brake
Salvagnini B3
Combining the advantages of hydraulic and electric technology with scalable automation and long-term productivity, the Salvagnini B3 electric press brake is a flexible, adaptable machine. The B3 was created with extensive expertise in press brake automation, software, mechanics, and electronics. The B3 is at the forefront of the press brake industry’s evolution to emphasize accuracy, efficiency, and flexibility